Spray foam insulation in Perris, CA - a sealed attic that keeps the heat out
Hot upstairs rooms and a big summer power bill often start in the attic. Foam under the roof seals the leaks and slows the heat.
- Licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
Is spray foam the right insulation for your Perris attic?
Spray foam insulation in Perris is sprayed onto the underside of your roof deck, where it slows the heat coming through the roof and closes the air leaks in one coat, so the attic stops cooking the rooms below it. Once the foam has cured and the house is aired out, you're back home.
Most foam calls I get come from older houses where the upstairs bakes all summer and the AC never catches up, often with the ducts running through that hot attic. What moves the price is how much roof deck we're covering, which foam goes up, how thick it goes on, and whether old material has to come out first through insulation removal. The schedule turns on that prep work and on finding a day when everyone, pets included, can stay somewhere else. The written estimate after I've seen your attic gives you the price for your house.
How do you know your attic could use spray foam?
Upstairs stays hot all summer
If the bedrooms upstairs are still warm at bedtime while the downstairs feels fine, heat is usually soaking through a thin or gappy attic. Every summer you wait, the AC runs longer and the power bill shows it.
Room over the garage won't cool
That room has attic or garage air on almost every side, so it's usually the first place a leaky, under-insulated ceiling shows up. Leaving it alone means a room you don't use from June to September.
Dark streaks and drafts
Gray lines on old insulation, or along the carpet at the baseboards, mean air has been moving through gaps around lights, pipes and the hatch and leaving dust behind. Until those gaps close, attic air and dust keep coming into the house.
How we install spray foam insulation
Foam isn't the right fit for every household, so before I pick a spray date I sit down with you and talk through who lives there, whether anyone has asthma, allergies, skin trouble or has reacted to spray foam before, and where everyone and the pets will stay. Anyone with that kind of history should read the product information carefully and may be better off with something other than foam, and I'd rather you choose another option than regret this one. Once that's settled, our crew sprays the underside of the roof deck so the foam slows the heat right where the sun hits it. Some foams need a covering over them for fire, such as a coating or drywall, depending on the foam and the code, so we put that up where it's called for, then air the house out, clean up, and I check the work before we leave.
Spray foam is one part of the attic work we do. When the ducts aren't up there, our attic insulation work on the attic floor is usually the better spend, and blown-in insulation, loose fill blown through a hose, is how we bring thin coverage up to depth once the gaps are sealed.
Foam under the roof deck
This suits houses with the AC and ducts in the attic, because foam on the roof brings them inside the insulated part of the house, so they lose less heat and any leaky joint still cools your home instead of the attic. It costs more than loose fill, and that's where it earns the money.
Air sealing plus a loose fill top-up
If nothing but insulation lives up there, sealing the gaps around lights, pipes and the hatch and then topping up the floor usually gets you most of the way for less. I'll tell you plainly if this is the better fit for your house.
Get a written spray foam estimate for your attic
We reply to every call and message within one business day, and the on-site estimate is free with no obligation. After you send the form, I set a time to come out, look at your attic with you, show you photos of what's up there and hand you a written estimate.
(951) 418-3036What spray foam insulation in Perris has to meet
California's Energy Code sets efficiency requirements for changes to existing houses, not only for new ones, so adding foam to a Perris attic is work that fits inside the state's rules. The standard for the home's outer shell, meaning its roof, walls and floors, depends on which climate zone the house sits in, and we size the job to what the state asks for your house.
Most houses I walk through here are older ones that never felt comfortable, with the ductwork up in a hot attic, and we see the same setup on jobs in Menifee and Moreno Valley. We're based in Perris and work in the cities around it across western Riverside County, so if your city isn't on our list, just ask.
What happens after you call about spray foam?
Call or send the form
You call (951) 418-3036 or send the form, and I answer or call you back. We set a time for me to come out and look at the attic with you.
Walk the attic with me
I show you photos of what's up there, point out anything that has to be fixed before foam goes on and tell you which foam I'd use. You get a written estimate with the price, so you know the number before anything is booked.
Spray day and final check
Our trained installers spray while the house is empty, and I check the work before we pack up. Then we walk you through what went in and when it's okay to come home.
Frequently asked questions
How much does spray foam insulation cost near Perris, CA?
Spray foam insulation in nearby Riverside usually costs about $2 to $5 per square foot. That's the going rate in the area, not a quote, and where your house lands depends on the foam type, the thickness and any prep work. Your own number comes from the written estimate after I've been up in your attic.
How long do we have to stay out of the house after spray foam insulation?
Everyone in the house, and any other trades working there, should be out while the foam goes in, and some foam makers recommend waiting 24 hours before coming back after a professional high-pressure job, though that can vary by product. You come back once the foam has finished curing and the house has been well aired out and thoroughly cleaned. I'll give you the wait the maker of our foam sets for your job, and you can ask our crew how each of those steps is handled.
What is the best way to choose between open-cell and closed-cell foam for an attic roof?
Choose closed-cell, the dense kind, when the foam also has to manage moisture, because under a roof deck it controls moisture as well as heat, while open-cell handles the heat and lets moisture vapor pass through. Open-cell still blocks air very well at the usual thickness. I'll look at your roof deck and tell you which one I'd put up there and why.
Does an attic sealed with spray foam need a way to get rid of moisture?
Yes, any attic that's closed off from outside air and brought inside the conditioned part of the house needs a way to remove moisture. Foaming the roof deck usually turns the attic into that kind of space, since the foam closes off the vents, so we work out how moisture will leave before we spray.
Should old attic insulation come out before spray foam goes in?
Old insulation that's been soaked or is full of droppings should come out first, because covering it just keeps the problem in the house. Dry, clean material can often stay, and I'll show you photos of what you've got so you can see the difference.
How much can a contractor ask for up front on an insulation job in California?
California's contractors board says a home improvement contractor can ask for no more than $1,000 or 10 percent of the contract price, whichever is less, before work starts. Any other payments have to be written into the contract and tied to work done or materials delivered.
Perris, CA
Book a spray foam walk-through of your attic
Before you call, find your attic hatch, note whether your ducts run through the attic and jot down any breathing or skin concerns in the house, so the first visit covers everything.